|
question on maercruiser engine mount
I aligned my engine today for the first time.
It seemed pretty straight forward. I just raised the engine several
turns of the motor mount jacking nuts until the alignment tool slid in
easily.
I noticed however that the rear motor mount screws appeared to be not
screwed down all the way, but they look like shoulder bolts and
perhaps they are supposed to look like the linked picture? http://home.comcast.net/~johnchaplain/rear_eng_mount.jpgBoth sides look the same, as if the bolts are not fastened down all
the way. Is this the way ot should look or is something wrong? Thanks for any help. John C. |
John
Mar 13
2006
|
| I am no mechanic, but something does not look right. It seems the rear of
the engine could bounce up and down. RCE |
RCE
Mar 13
|
| Aside from my dyslexic spelling in the last post I forgot to mention; this is a 5.0l Mercruiser w/Alpha-one outdrive. On Mon, 13 Mar 2006 18:11:22 -0500, John Chaplain <John
Chaplain@somewhere.net> wrote: |
John
Mar 13
|
|
|
Disclaimer: This is a computer-generated and formatted feed of current postings to a public
Internet forum. We do not control the information delivered, nor do we endorse or monitor its
content. Internet forums may carry offensive, harmful, inaccurate, and otherwise inappropriate material.
|
|
