|
BMW sterndrive
Has anyone in the group had experience with a rattling BMW MKII sterndrive
unit or an early Volvo which is similar. Mine rattles loudly after a run on
the plane when you come down to idle speed. It wont rattle in neutral till
you get the revs up to about 1800 then the rattle comes back.It has no decernable rattle under load, just idle after a planing run. The
unis and gimbal bearing have already been replaced. When I dont use the boat
a few days and start up it is quiet at first, but always comes back. Anyone? Thanks
Cam |
Grant
Feb 20
|
| Most marinized engines use a regular flywheel. A flexplate is typically
used with an automatic trnsmission and in that case the torque converter
acts as the flywheel weight. |
James
Feb 21
|
| A flex plate can do that. Might be worth checking. Dan |
Danlw
Feb 19
|
| I was thinking the same thing, But I wonder if the engine actually has
a flex plate (like an automatic trans) or if the ring gear or is
pressed on the flywheel (like a manual shift)? |
Tim
Feb 19
|
|
|
Disclaimer: This is a computer-generated and formatted feed of current postings to a public
Internet forum. We do not control the information delivered, nor do we endorse or monitor its
content. Internet forums may carry offensive, harmful, inaccurate, and otherwise inappropriate material.
|
|
